BR - Tent floor cleaning - Effective cleaning of tent floor elements
- BR1200
- BR2500
- BR600
BR1200

More information
Technical Data
- Type of control: manual
- Processing width: 1.100mm
- Operators: 1
- Flow rate: 2 - 5 m/min
- Power supply: 63 A/ 400 V
- Power consumption: 8 KWh
- Water supply: 1"
- Water consumption: 200 liter
- Dimensions (WxHxD): 8.500mm x 1.800mm x 1.600mm
- Weight: 1.800kg
- Drain connection: 100mm
BR2500

More information
Technical Data
- Type of control: manual
- Processing width: 2.500mm
- Operators: 1
- Flow rate: 2 - 5 m/min
- Power supply: 32 A/ 400 V
- Power consumption: 8 KWh
- Water supply: 1"
- Water consumption: 150 liter
- Dimensions (WxHxD): 10.000mm x 1.600mm x 3.000mm
- Weight: 2.200kg
- Drain connection: 100mm
BR600

Technical Data
- Type of control: manual
- Processing width: 600mm
- Operators: 1
- Power supply: 32 A/ 400 V
- Water supply: 1"
- Dimensions (WxHxD): 6.000mm x 1.455mm x 1.100mm
- Drain connection: 100mm
Options, variations and accessories
-
OU
Top and bottom brushes -
G
Speed control for the brushes -
W
Water tank with cycle for high-pressure cleaning -
U
Wash water cycle -
G
Conveyor belt extension -
D
Additional thermal post-drying of the floor panels
The double brushes system is almost a standard by now. Advantageously the panels only need to get put through the machine once, not like with only one brush twice if necessary to clean both sides. With the double brushes system the panels get cleaned from the top and the bottom automatically.
If it is necessary to adjust the speed this option is optimal. For almost clean plates it is possible to slow down the brushes and for very dirty plates accelerate the brushes easily. This option is individual customer-tailored.
The high pressure water cycling provides minimal water consumption with maximal usage. The water gets dosed and heated as necessary. With a dirty resistant high pressure pump the water gets used for the pre-cleaning over and over again. The following waste water, used as fresh water rinsing the panels, gets back into the water cycling so as to there is always a change of water and adjustment of the water loss. The dosage of detergent is of course customer-specific adjustable.
Wash water cycle catch tub for cleaning water (detergent tank) approx. 200 liters with strain filter and domestic waterworks (high-grade steel).
This option is advisable for long panels or easy handling or many plates in a row. The conveyor belt extension means more space to depost the panels before and after cleaning.
The usual drying gets done by the radial blower but it is also possible to get a special drying with the thermal post-drying.